Silent check valve is a kind of automatic valves whose disc can open or close automatically based on fluid media inside pipes flowing. The disc of valve rotates with the centerline of body. Under the pressure of media in one direction, the disc opens; when media flow reversely, the disc closes automatically,...
Insulation ball valve and flanged gate valve are the same category of valve. Due to good heat preservation and cold insulation, insulation ball valve has been widely applied in chemical engineering, metallurgy, pharmacy and food, having high popularity on the market. Proper installation cannot only...
Electric high pressure gate valve uses flange connection, a kind of the whole direct casting valve. Electric high pressure gate valve is mainly used for water, oil and overheating steam pipes whose pressure below PN16.0MPa. Bonnet connection is used in central section, still having good sealing performance...
Intelligent pneumatic ball valve is driven by pneumatic actuator, having realized completed intelligent control. For its own advantages, intelligent pneumatic ball valve has been applied in different fields. For example, because of compact structure and reliable sealing, the valve is used for...
Corrosion on valve body is considered that the metal materials are destructed under the environment of chemical or electrochemical environment. The corrosion is caused by spontaneous interaction between metal and surroundings. So, isolating metal from surroundings or using more nonmetal synthetic materials...
For rising stem wedge gate valve, connection between stem and core loses efficacy which caused by corrosion, abrasion or improper operation during valve on-off, then, the core falls off. If the valve cannot be opened after being closed, the valve only can be cut out from the system and replaced. If...
Electrochemistry corrodes metals in different forms. It does not only function between two kinds of metals, but also can cause potential difference due to differential solubility of solution, differential solubility of oxygen and the tiny difference in internals of metals, enhancing corrosion. Some...
Before using sliver brazing to install valve, analyze the application to determine which valve is the most suitable for installation and keep in mind the service for which the valve is recommended. Before installing the correct valve, review the installation instructions to prevent damage to the valve...
When use pipeline to transmit liquid or gas, the cost is only 1/3 of railway transportation and 2/3 of marine transportation. So, pipeline has already been highly developed for 100 years. The valves used for pipeline are called as pipeline valves, including ball valve, gate valve, check valve and plug...
The followings are the reasons causing defects on castings of valve. 1. Pore Pores are formed by gas which cannot escape and remained in metal. The internal wall of pore is smooth and contains gas, which has higher reflectivity. Pores show spherality or ellipsoid basically (spot defect), having...